You did a great job. I like your Root Cause Analysis you completed with Cause and Effect Chain and with 5+Whys. Thank you.

להוסיף מערכת קירור לצינורות שעשויות מפלסטיק, לצורך איזון טמפרטורות ושליטה על התפשטות והתכווצות הצינורות

להכניס בועות אוויר תוך הצינורות מה שיוצר לנו הגנה פנימית בפני הקורוזיה(אפקט סודה) ובנוסף יעזור בזירוז תהליך הנעת המים בצינורות

למצוא איזשהו גוף שמכיל חומר שנותן אישהו אנידקציה שנותנת צבע שנשים תוך הצינורות שמעידה שיש קורוזיה

לעשות צינורות מתכת עם ציפוי פנימי מפולימר

to make gold tubes that withstand changing environments and corrosion

Make an inner layer from a material like aluminum that produces a passive layer that protects the pipes from the inside

connect the lead to the ground with the pipes, in this way, we reset the potential difference and prevent corrosion.

לקבוע מעקב בדיקות לצינורות הפנימיות כך שנהיה מעודכנים במצב הקורוזיה לפני ההגעה לכשל כלשהו

להזרים חומר בצינורות שיעשה ציפוי פנימי נגד הקורוזיה

לערוך ניסויים במערכת הדמייה קטנה לתחנה שבה נבדוק השפעת שינוי סוגי המלחים וסוגי הפלב"מים על התקדמות הקורוזיה בצינורות

מציאת סוג פלב"ם טוב שעומד בקורוזיה

Solar power plants based on concentrated solar power technology use heat energy to heat water
into steam and drive turbines.
One of the challenges facing the engineers of those stations is that usually the hours of high
electricity consumption are at night after the workers return to their homes and at that time there
is no sun and no electricity is generated.
In order to utilize solar energy during the day even during the night, the energy needs to be stored,
for the purpose of storing energy excess energy is used during the day for the purpose of melting
salts with a high heat capacity and thus storing the heat energy in them.
The salt tanks and the pipes through which they Tow are made of L316 Stainless steel and are
exposed to corrosion due to the exposure to the salts and this causes irreversible failures in the
line.

𝙲𝚘𝚛𝚛𝚘𝚜𝚒𝚘𝚗 𝚒𝚗 𝚙𝚒𝚙𝚎𝚜 𝚊𝚝 𝙿𝚑𝚘𝚝𝚘𝚟𝚘𝚕𝚝𝚊𝚒𝚌 𝚙𝚘𝚠𝚎𝚛 𝚜𝚝𝚊𝚝𝚒𝚘𝚗       𝚃𝚊𝚛𝚒𝚚 𝙰𝚋𝚞 𝙷𝚞𝚜𝚜𝚎𝚒𝚗   𝙵𝚊𝚝𝚖𝚒 𝙷𝚒𝚓𝚊𝚣𝚒

𝙲𝚘𝚛𝚛𝚘𝚜𝚒𝚘𝚗 𝚒𝚗 𝚙𝚒𝚙𝚎𝚜 𝚊𝚝 𝙿𝚑𝚘𝚝𝚘𝚟𝚘𝚕𝚝𝚊𝚒𝚌 𝚙𝚘𝚠𝚎𝚛 𝚜𝚝𝚊𝚝𝚒𝚘𝚗






𝚃𝚊𝚛𝚒𝚚 𝙰𝚋𝚞 𝙷𝚞𝚜𝚜𝚎𝚒𝚗  
𝙵𝚊𝚝𝚖𝚒 𝙷𝚒𝚓𝚊𝚣𝚒

Loss or waste of elements of a system or its surroundings – substances, materials, sub-systems, products, fields, etc.  Can be partial or complete, permanent or temporary.

Loss of substance

Segmentation

Preliminary action

Pneumatics or hydraulics

Discarding and recovering

This parameter is designed as a catch-all for any form of inefficiency internal to or around a system that manifests as a harmful effect on something around the system.  Can also mean any form of pollutant or environmental emission generated by a system or object.  This is a derivative of the 'loss of substance' definition above, the focus however is on "harmful emissions" this aspect is on the production of chemicals, etc. that was not one of the original substances contained within the system.

Object generated harmful factors

Pipes may wrap or elongate due to temperature change

The coating materials were of poor quality.

The pipes were not properly coated with a protective layer to prevent corrosion.

The pipes are made of a material that is prone to corrosion.

Stainless steel pipes in which water flows

Apply a protective coating such as epoxy, polyurethane, or other suitable material.

Invest in higher quality coating materials that are designed to last longer and provide better protection

The best way to eliminate corrosion is to use a corrosion-resistant material such as stainless steel, aluminum, or plastic. Additionally, you can coat the pipes with a protective coating such as a zinc-based paint or a specialized corrosion-resistant coating. Finally, you can also use corrosion inhibitors to help reduce the rate of corrosion.

1. Use corrosion-resistant materials such as stainless steel, copper, or brass for pipes.

2. Use a protective coating such as epoxy, zinc, or galvanized steel on the pipes.

3. Install an anode rod in the pipes to attract corrosion away from the pipes.

The best way to eliminate water flow in stainless steel pipes is to use a water filter to remove any debris or contaminants from the water before it enters the pipe.

𝙲𝚘𝚛𝚛𝚘𝚜𝚒𝚘𝚗 𝚒𝚗 𝚙𝚒𝚙𝚎𝚜 𝚊𝚝 𝙿𝚑𝚘𝚝𝚘𝚟𝚘𝚕𝚝𝚊𝚒𝚌 𝚙𝚘𝚠𝚎𝚛 𝚜𝚝𝚊𝚝𝚒𝚘𝚗 𝚃𝚊𝚛𝚒𝚚 𝙰𝚋𝚞 𝙷𝚞𝚜𝚜𝚎𝚒𝚗 𝙵𝚊𝚝𝚖𝚒 𝙷𝚒𝚓𝚊𝚣𝚒

Similar projects

Improve cleaning of vacuum oven