login
Updated 07/16/2024
3

עמידות פותחן בקבוקיםמגישים:תום ברויאר איתי אלעזר

מתוך הפתרונות המוצאים על ידי הפלטפורמה נבחר פתרון להוזלה על ידי בחירת חומר גלם שונה על חשבון משך זמן השירות של המוצר.

פתרון זה הוא פתרון טוב אך יש לבחון אספקטים נוספים כגון שינוי שיטת הייצור, החלפת חומרי גלם, קליטה והכשרה של עובדים חדשים וצבירת יידע נוסף לעובדים הקיימים

thombr avatar
thombr
Jun 13 2023 3:44:39 pm
Pending
Login to comment
Anatoly Agulyansky avatar

Anatoly Agulyansky

06/22/2023

It is an interesting topic and great solutions. We can see a good example, showing that engineering thinking tools are applicable everywhere. Thank you.

Similar projects

Aluminum is common material used in the welding industry due to its suitable properties, Although aluminum welding generally has disadvantages. One of these weaknesses is the formation of porosity, which will affect the welded joint's mechanical properties. porosity is formed due to two mechanisms, shrinkage porosity caused by shrinkage during the metal solidification process and gas porosity caused by air trapping and undissolved hydrogen. The welding process often produces gases such as hydrogen, carbon dioxide and steam. During welding, the metal goes into a liquid state and then cools at a rapid rate. because In a liquid there is a higher solubility of a gas than in a solid, This may trap gases inside the material and create bubbles when the welding takes place. n order to minimize the problems with the porosity of the material due to welding, it is necessary to control the speed of the process, thermal gradient, dynamics of melt pool flow and solidification. Therefore, in order to solve this problem, we use laser beam welding.

sahar gordo levin avatar
sahar gordo levin